To use all functions of this page, please activate cookies in your browser.
my.bionity.com
With an accout for my.bionity.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
Residual dipolar couplingThe residual dipolar coupling between two spins in a molecule occurs if the molecules in solution exhibit a partial alignment leading to an incomplete averaging of spatially anisotropic dipolar couplings. Partial molecular alignment leads to an incomplete averaging of anisotropic magnetic interactions such as the magnetic dipole-dipole interaction (also called dipolar coupling), the chemical shift anisotropy, or the electric quadrupole interaction. The resulting so-called residual anisotropic magnetic interactions are becoming increasingly important in biomolecular NMR spectroscopy.[1] Additional recommended knowledge
History and pioneering worksNMR spectroscopy in partially oriented media was first discovered in 1963[2], and in a very fundamental paper Saupe was also able to present the essential theory to describe and understand the observable phenomena only one year later[3]. After this initiation a flood of NMR spectra in various liquid crystalline phases was reported (see e.g. [4][5][6][7]). A second technique for partial alignment which is not limited by a minimum anisotropy is strain-induced alignment in a gel (SAG), based on the pioneering work of Deloche and Samulski[8]. The technique was extensively used to study the properties of polymer gels by means of high-resolution deuterium NMR[9], but only lately gel alignment was used to induce RDCs in molecules dissolved into the gel[10][11]. SAG allows the unrestricted scaling of alignment over a wide range and can be used for aqueous as well as organic solvents, depending on the polymer used. As a first example in organic solvents, RDC measurements in stretched polystyrene (PS) gels swollen in CDCl3 were reported as a promising alignment method[12]. In 1995, James H. Prestegard and coworkers demonstrated that NMR spectra of certain proteins (in this case cyanometmyoglobin, which has a very highly anisotropic paramagnetic susceptibility), taken at very high field, may contain data that can usefully complement NOEs in determining a tertiary fold.[13] In 1996 and 1997, Tjandra et al. measured RDCs in a diamagnetic protein (ubiquitin). The results were in good agreement with crystal structure.[14][15] Physics of RDC
The general form for the dipolar coupling hamiltonian of two spins, I and S is as follows:
where:
The above equation can be rewritten in the following form:
The first term on the left is similar to the hamiltonian for J-coupling, which is responsible for splitting of lines in NMR spectrum. In other words coupling constant will differ when the molecules in the sample are aligned (J + 2D) or not (J). The difference is what is named as residual dipolar coupling:
Note that residual dipolar coupling can be positive or negative, depending on the range of angles that are sampled.[16] In addition to static distance and angular information, RDC may contain information about internal motions in molecules. To each atom in a molecule one can associate a motion tensor B, that may be computed from RDCs according to the following relation[17]:
where A is the molecular alignment tensor. The rows of B contain the motion tensors for each atom. The motion tensors also have five degrees of freedom. From each motion tensor, 5 parameters of interest can be computed. The variables Si2, ηi, αi, βi and γi are used to denote these 5 parameters for atom i. Si2 is the magnitude of atom i’s motion; ηi is a measure of the anisotropy of atom i’s motion; αi and βi are related to the polar coordinates of the bond vector expressed in the initial arbitrary reference frame (i.e., the PDB frame). If the motion of the atom is anisotropic (i.e., ηi = 0), the final parameter, γi measures the principal orientation of the motion. Note that the RDC-derived motion parameters are local measurements. Measurement of RDCAny RDC measurement in solution consists of two steps, aligning the molecules and NMR studies: Methods for aligning moleculesFor diamagnetic molecules at moderate field strengths, molecules have little preference in orientation, the tumbling samples a nearly isotropic distribution, and average dipolar couplings goes to zero. Actually, most molecules have preferred orientations in the presence of a magnetic field, because most have anisotropic magnetic susceptibility tensors, Χ.[18] The method is most suitable for systems with large values for magnetic susceptibility tensor. This includes: Protein-nucleic acid complex, nucleic acids, proteins with large number of aromatic residues, porphyrin containing proteins and metal binding proteins (metal may be replaced by lanthanides). For a fully oriented molecule, the dipolar coupling for an 1H-15N amide group would be over 20 kHz, and a pair of protons separated by 5 Å would have up to ~1 kHz coupling. However the degree of alignment achieved by applying magnetic field is so low that the largest 1H-15N or 1H-13C dipolar couplings are <5 Hz.[19] Therefore many different alignment media have been designed:
NMR experimentsThere are numerous methods that have been designed to accurately measure coupling constant between nuclei[23]. They have been classified into two groups: frequency based methods where separation of peaks centers (splitting) is measured in a frequency domain, and intensity based methods where the coupling is extracted from the resonance intensity instead of splitting. The two methods complement each other as each of them is subject to a different kind of systematic errors. Here are the prototypical examples of NMR experiments belonging to each of the two groups:
RDC and structural biologyRDC measurement provides information on the global folding of the protein or protein complex. As opposed to traditional NOE based NMR structure determinations, RDCs provide long distance structural information. It also provides information about the dynamics in molecules on time scales slower than nanoseconds. RDC and studies of biomolecular structureMost NMR studies of protein structure are based on analysis of the Nuclear Overhauser effect, NOE, between different protons in the protein. Because the NOE depends on the inverted sixth power of the distance between the nuclei, r-6, NOEs can be converted into distance restraints, that can be used in molecular dynamics-type structure calculations. RDCs provide orientational restraints rather than distance restraints, and has several advantages over NOEs:
Provided that a very complete set of RDCs is available, it has been demonstrated for several model systems that molecular structures can be calculated exclusively based on these anisotropic interactions, without recourse to NOE restraints. However, in practice, this is not achievable and RDC is used mainly to refine a structure determined by NOE data and J-couplings. One problem with using dipolar couplings in structure determination is that a dipolar coupling does not uniquely describe an internuclear vector orientation. Moreover if a very small set of dipolar couplings are available, the refinement may lead to a structure worse than the original one. For a protein with N aminoacids, 2N RDC constraint for backbone is the minimum needed for an accurate refinement. [24] In the case of elongated molecules such as RNA, where local torsional information and short distances are not enough to constrain the structures, RDC measurements can provide information about the orientations of specific chemical bonds throughout a nucleic acid with respect to a single coordinate frame. Particularly, RNA molecules are proton-poor and overlap of ribose resonances make it very difficult to use J-coupling and NOE data to determine the structure. Moreover, RDCs between nuclei with a distance larger than 5-6 Å can be detected. This distance is too much for generation of NOE signal. This is because RDC is proportional to r-3 whereas NOE is proportional to r-6. RDC measurements have recently been proved useful for a rapid determination of the relative orientations of units of known structures in proteins.[25] In principle, the orientation of a structural subunit, which may be as small as a turn of a helix or as large as an entire domain, can be established from as few as five RDCs per subunit.[26] RDC and protein dynamicsAlthough crystallography B-factors, NMR spin relaxation analysis can be used to measure motional parameters, they suffer from several drawbacks. For example they assume dynamic independence of different regions of the molecule under investigation. Techniques like quasielastic and inelastic neutron scattering, diffuse X-ray scattering and inelastic Mossbauer scattering can in principle provide information about correlated motions. However interpretation of data on molecular level is often difficult. While molecular dynamic simulation are very successful in predicting pico to nano second motions, they are often limited in their abilities in investigating "long"-time scale motions. In the recent years success has been reported by several investigators in predicting slow conformational changes in proteins at the microsecond-millisecond time-scales (or the long time-scale motions) that are related to catalysis in enzymes such as dihydrofolate reductase and cyclophilin A using theoretical techniques. These slow conformational changes have been verified by NMR techniques. For the first time in 1997, Prestegard et al. investigated slow dynamics (>10-9 s) in myoglobin by RDC measurement.[27] In general, internal motion of a bond vector relative to the molecular alignment frame scales the size of the RDC relative to a static average orientation. This scaling factor is dependent on both the amplitude and the direction of such motion relative to the alignment tensor; scaling factors therefore will differ with the alignment medium used. RDC approach to studying dynamics is most robust for large-amplitude processes (> 20°).[28] Further readingBooks:
Review papers:
Classic papers:
References
See also
|
|
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Residual_dipolar_coupling". A list of authors is available in Wikipedia. |