Oxygen mask

  An oxygen mask provides a method to transfer breathing oxygen gas from a storage tank to the lungs. Oxygen masks may cover the nose and mouth (oral nasal mask) or the entire face (full face mask). They may be made of plastic, silicone, or rubber.

Additional recommended knowledge

Don't let static charges disrupt your weighing accuracy

How to ensure accurate weighing results every day?

Correct Test Weight Handling Guide: 12 Practical Tips

Medical plastic oxygen masks

Plastic masks are used primarily by medical care providers for oxygen therapy as they are disposable and reduce cleaning costs. As they are light in weight they are accepted by many patients who may feel uncomfortable wearing an oxygen mask. Plastic masks also allow medical care providers to see through the mask to the face of a patient and determine if they are in distress.

Silicone and rubber oxygen masks

  Silicone and rubber oxygen masks are heavier than plastic masks, they are designed to provide a tight fit without leakage for long duration oxygen breathing by aviators, medical researchers, and hyperbaric chamber or other patients that require administration of 100% oxygen such as carbon monoxide poisoning victims. Valves inside these tight fitting masks control the flow of oxygen into the mask and exhalation from the mask,so that rebreathing of exhalation gas is not possible thus insuring inhalation of 100% oxygen.

Hoses and tubing / oxygen regulators

Hoses or tubing connect an oxygen mask to the oxygen supply. Hose is larger in diameter then tubing and can allow greater oxygen flow. When hose is used it may have a ribbed or corrugated design to allow bending of the hose while preventing twisting and cutting off the oxygen flow. The quantity of oxygen delivered from the storage tank to the oxygen mask is controlled by a valve called a regulator. Some types of oxygen masks have a breathing bag made of plastic or rubber attached to the mask or oxygen supply hose to store a supply of oxygen to allow deep breathing without waste of oxygen with use of simple fixed flow regulators.

Aviators oxygen masks

  Three main kinds of oxygen masks are used by pilots and crews who fly at high altitudes.

Continuous flow masks supply a continuous flow of oxygen to the mask. The mask is usually equipped with a "rebreather bag" (recognizable from airline demonstrations), which recycles part of the exhaled air and saves oxygen. This type of mask is used by general aviation aircraft flying above 12'500 feet MSL (up to about 25'000 MSL) and for airline passengers.

"Diluter demand" and "Pressure demand" masks supply oxygen only when the user inhales. They both require an airtight seal between the mask and the user's face.

Diluter demand oxygen masks supply oxygen on demand. As the user inhales a demand oxygen regulator opens a valve and supplies the amount of oxygen required for the altitude. As the altitude increases the amount of oxygen delivered by the regulator also increases to 100 percent oxygen. Diluter demand oxygen mask systems are used up to 34 thousand feet altitude.

With a pressure demand system, 100 percent oxygen can be forced by a pressure demand regulator into the lungs of aviators using these masks above 34 thousand feet altitude, as continuous flow or diluter demand oxygen regulators cannot provide enough oxygen above this altitude even though they may supply 100 percent oxygen. Inhalation of oxygen from a mask fitted to a pressure demand regulator is easy but exhalation requires more effort. Aviators are trained on the pressure demand breathing method in an altitude chamber. Because of their tight fit, pressure demand type aviator oxygen masks are often used in hyperbaric oxygen chambers and for oxygen breathing research projects with standard oxygen regulators.

Aviation passenger oxygen masks and aircraft emergency oxygen systems

Main article: Emergency oxygen system

Most commercial aircraft are fitted with oxygen masks for use in emergencies where the cabin pressurisation system is faulty, or where a problem has resulted in sudden decompression. In general, commercial aircraft are pressurized at a maximum cabin altitude equivalent to about 8,000 feet, where it is possible to breathe normally without an oxygen mask. If the oxygen pressure in the cabin drops below a safe level, risking hypoxia, compartments containing the oxygen masks will open automatically, either above or in front of the passenger and crew seats, and in the lavatories.

Self-contained breathing apparatus (SCBA)

Firefighters and emergency service workers use full face masks that provide breathing air and eye and face protection. These masks are typically attached to a tank carried upon the back of the wearer and are called self-contained breathing apparatuses (SCBA). Because oxygen breathing is hazardous in areas where fires may be burning, SCBA units are normally filled with compressed breathing air rather than oxygen.

Specialized oxygen masks for divers and astronauts

Specialized full face masks that supply oxygen or other breathing gases are used by divers and astronauts to remove nitrogen from their bloodstream prior to space walks (EVA) or underwater decompression.

Oxygen masks for high altitude climbers

Oxygen masks are used by climbers of high peaks such as Mt. Everest. Oxygen tanks called "bottles", used by climbers are made of lightweight high strength metals and are covered by spun high strength fabric threads such as kevlar. The special bottles are filled with oxygen at very high pressures. The higher pressures allow the bottles a longer lasting supply of oxygen. Oxygen masks used by climbers are designed to optimize the oxygen bottle supply rather than provide 100% oxygen and allow a climber supplemental oxygen for an extended period so that a final summit climb and decent to a camp lower than the summit can occur. Today most mountaineers do not use oxygen equipment unless the climb is above 7000 meters altitude.

Oxygen mask retention systems

Medical oxygen masks are held in place by medical personnel or the user by hand, or they may be fitted with a light weight elastic headband so the mask can be removed quickly. Full face masks are secured by head strap harnesses with several straps that create a web around the head.. Tight fitting oxygen masks are secured upon the face by the 4 point head strap system with two head straps securing the mask at 4 places upon the mask to the face. Aviators pressure breathing oxygen masks are often equipped with "quick don" head harnesses that allow pilots and crews flying in pressurized aircraft to rapidly don their oxygen masks in an emergency. Military aviators oxygen masks are secured to flight helments by quick release retention methods.

See also

• Mask
• Full face diving mask
• Nasal cannula
• Oxygen therapy
• Hyperbaric oxygen therapy
• Space suit
• Oxygen tent

References