To use all functions of this page, please activate cookies in your browser.
my.bionity.com
With an accout for my.bionity.com you can always see everything at a glance – and you can configure your own website and individual newsletter.
- My watch list
- My saved searches
- My saved topics
- My newsletter
Neutron generatorNeutron generators are neutron source devices which contain compact linear accelerators and that produce neutrons by fusing isotopes of hydrogen together. The fusion reactions take place in these devices by accelerating either deuterium, tritium, or a mixture of these two isotopes into a metal hydride target which also contains either deuterium, tritium or a mixture. Fusion of deuterium atoms (D + D) results in the formation of a He-3 ion and a neutron with a kinetic energy of approximately 2.5 MeV. Fusion of a deuterium and a tritium atom (D + T) results in the formation of a He-4 ion and a neutron with a kinetic energy of approximately 14.1 MeV. Thousands of such small, relatively inexpensive systems have been built over the past five decades. Additional recommended knowledge
Neutron Generator Overview[additional text needed here] Sealed Neutron Tubes[additional text needed here] Ion Sources[additional text needed here] Spark Gap
Cold Cathode (Penning)
Hot Cathode
Microwave
Electron Cyclotron Resonance (ECR)
Radio Frequency (RF)
Targets[additional text needed here] High Voltage Power Supplies[additional text needed here] One particularly interesting approach for generating the high voltage fields needed to accelerate ions in a neutron tube is to use a pyroelectric crystal. In April of 2005 researchers at UCLA demonstrated the use of a thermally cycled pyroelectric crystal to generate high electric fields in a neutron generator application. In February of 2006 researchers at Rensselaer Polytechnic Institute demonstrated the use of two oppositely poled crystals for this application. Using these low-tech power supplies it is possible to generate a sufficiently high electric field gradient across an accelerating gap to accelerate deuterium ions into a deuterated target to produce the D + D fusion reaction. These devices are similar in their operating principle to conventional sealed-tube neutron generators which typically use Cockcroft-Walton type high voltage power supplies. The novelty of this approach is in the simplicity of the high voltage source. Unfortunately, the relatively low accelerating current that pyroelectric crystals can generate, together with the modest pulsing frequencies that can be achieved (a few cycles per minute) limits their near-term application in comparison with today's commercial products (see below). Also see pyroelectric fusion. [1] High Voltage Insulation[additional text needed here] Other Neutron Generator TechnologiesIn addition to the conventional neutron generator design described above several other approaches exist to use electrical systems for producing neutrons. Inertial Electrostatic Confinement/Fusor
Dense Plasma Focus
Organizations that manufacture neutron generators
See Also ...
Wiki References |
|
This article is licensed under the GNU Free Documentation License. It uses material from the Wikipedia article "Neutron_generator". A list of authors is available in Wikipedia. |