Nessler's reagent

Neßler's reagent is a reagent named after Julius Neßler and is used to detect small amounts of ammonia. It is a 0.09 mol/L solution of potassium tetraiodomercurate(II) (K₂[HgI₄]) in 2.5 mol/L potassium hydroxide. A yellow coloration indicates the presence of ammonia: at higher concentrations, a brown precipitate may form. The sensitivity as a spot test is about 0.3 μg NH₃ in 2 μL.

NH₄⁺ + 2[HgI₄]²⁻ + 4OH⁻ → HgO·Hg(NH₂)I + 7I⁻ + 3H₂O

Additional recommended knowledge

How to quickly check pipettes?

What is the Correct Way to Check Repeatability in Balances?

Correct Test Weight Handling Guide: 12 Practical Tips

Toxicity

It is toxic if swallowed, inhaled or absorbed through the skin. It presents a neurological hazard and may act as a carcinogen and be a reproductive hazard. It is corrosive and causes burns.

Other names

Neßler's solution, mercuric potassium iodide, mercury(II) potassium iodide, Channing's solution, potassium mercuric iodide, potassium tetraiodomercurate(II)

Preparation

Neßler's reagent is generally prepared from potassium iodide and mercury(II) chloride. Hot concentrated solution of mercury(II) chloride is added to concentrated solution of potassium iodide, until the precipitate of mercury(II) iodide stops dissolving. The liquid is filtered, and potassium hydroxide and a further bit of mercury(II) chloride solution are added. The resulting solution is then cooled and diluted to required concentration. [1]

References

• Svehla, G. (1979). Vogel's Textbook of Macro and Semimicro Qualitative Inorganic Analysis, London:Longman. ISBN 0-582-44367-9