Median lethal dose

In toxicology, the median lethal dose, LD₅₀ (abbreviation for “Lethal Dose, 50%”), or LCt₅₀ (Lethal Concentration & Time) of a toxic substance or radiation is the dose required to kill half the members of a tested population. LD₅₀ figures are frequently used as a general indicator of a substance's acute toxicity. The test was created by J.W. Trevan in 1927^[1] but is now being phased out in favor of the Fixed Dose Procedure.^[2]

The term semilethal dose is occasionally used with the same meaning, particularly in translations from non-English-language texts, but can also refer to a sublethal dose; because of this ambiguity, it is usually avoided.

Medical Subject Headings, Medical Subject Headings (MeSH) (ID D007928) defines LD₅₀ as:

The dose amount of poisonous or toxic substance or dose of ionizing radiation required to kill 50% of the tested population.

Additional recommended knowledge

How to ensure accurate weighing results every day?

Weighing the right way

Correct Test Weight Handling Guide: 12 Practical Tips

Conventions

The LD₅₀ is usually expressed as the mass of substance administered per unit mass of test subject, such as grams of substance per kilogram of body mass. Stating it this way allows the relative toxicity of different substances to be compared, and normalizes for the variation in the size of the animals exposed (although toxicity does not always scale simply with body mass). Typically, the LD₅₀ of a substance is given in milligrams per kilogram of body weight. In the case of some neurotoxins such as batrachotoxin, one of the most deadly venoms known, the LD₅₀ may be more conveniently expressed as micrograms per kilogram (µg/kg)of body mass.

The choice of 50% lethality as a benchmark avoids the potential for ambiguity of making measurements in the extremes, and reduces the amount of testing required. However, this also means that LD₅₀ is not the lethal dose for all subjects; some may be killed by much less, while others survive doses far higher than the LD₅₀. Measures such as 'LD1' and 'LD99' (dosage required to kill 1% or 99% respectively of the test population) are occasionally used for specific purposes.^[3]

Lethal dosage often varies depending on the method of administration; for instance, many substances are less toxic when taken by mouth than when intravenously administered. For this reason, LD₅₀ figures are often qualified with the mode of administration, e.g. "LD₅₀ i.v."

The related quantities LD₅₀/30 or an LD₅₀/60 are used to refer to a dose that without treatment will be lethal to 50% of the population within (respectively) 30 or 60 days. These measures are used more commonly within Radiation Health Physics, as survival beyond 60 days usually results in recovery.

A comparable measurement is LCt₅₀ which relates to lethal dosage from exposure, where C is concentration and t is time. It is often expressed in terms of mg-min/m³. ICt₅₀ is the dose which will cause incapacitation rather than death. These measures are commonly used to indicate the comparative efficacy of chemical warfare agents, and dosages are typically qualified by rates of breathing (e.g., resting = 10 l/min) for inhalation, or degree of clothing for skin penetration. The concept of Ct was first proposed by Fritz Haber, and is sometimes referred to as Haber's Law, which assumes that exposure to 1 minute of 100 mg/m³ is equivalent to 10 minutes of 10 mg/m³ (1 × 100 = 100, as does 10 × 10 = 100).

Some chemicals, such as hydrogen cyanide are rapidly detoxified by the human body, and do not follow Haber's Law. So in these cases the lethal concentration may be given simply as LC₅₀ and qualified by a duration of exposure (e.g. 10 minutes). The Material Safety Data Sheets for toxic substances frequently use this form of the term even if the substance does follow Haber's Law.

For disease-causing organisms, there is also a measure known as the median infective dose and dosage. The median infective dose (ID₅₀) is the number of organisms received by a person or test animal qualified by the route of administration (e.g., 1,200 org/man per oral). Because of the difficulties in counting actual organisms in a dose, infective doses may be expressed in terms of biological assay, such as the number of LD₅₀'s to some test animal. In biological warfare infective dosage is the number of infective doses per minute for a cubic meter (e.g., ICt₅₀ is 100 medium doses - min/m³).

Animal rights concerns

Animal-rights and animal-welfare groups, such as Animal Rights International,^[4] have campaigned against LD₅₀ testing on animals in particular as, in the case of some substances, causing the animals to die slow, painful deaths. Several countries, including the UK, have taken steps to ban the oral LD₅₀, and the Organization for Economic Co-operation and Development (OECD) abolished the requirement for the oral test in 2001 (see Test Guideline 401, Trends in Pharmacological Sciences Vol 22, February 22, 2001).

Examples

• Oral LD₅₀ of Vitamin C (ascorbic acid) in rats is 11.9 g/kg . ^[5]
• Oral LD₅₀ of Grain alcohol: 10.6 g/kg in young rats, 7.06 g/kg in aged rats.^[6]
• Oral LD₅₀ of Table Salt: 3 g/kg in rats^[7]
• Oral LD₅₀ of Tetrahydrocannabinol (active ingredient found in Cannabis): 1270 mg/kg in male rats, 730 mg/kg in female rats.^[8]
• Oral LD₅₀ of Nicotine: 50 mg/kg in rats.^[9]
• Subcutaneous LD₅₀ of Batrachotoxin: estimated at 2 to 7 µg/kg in humans.^[10]
• LD₅₀ of Polonium 210: estimated at 10 ng/kg (inhaled) to 50 ng/kg (ingested)^[11]
• LD₅₀ of Botulinum toxin: estimated at 1 ng/kg.^[12]

See also

• Animal testing
• Vivisection
• Reed-Muench method

Other measures of toxicity

• Certain safety factor
• Fixed Dose Procedure
• Lowest published toxic concentration (TCLo)
• Lowest published lethal dose (LDLo)
• IC₅₀ (50% inhibitory concentration)
• Draize test

Related measures

• TCID₅₀ Tissue Culture Infective Dosage
• EID₅₀ Egg Infective Dosage
• ELD₅₀ Egg Lethal Dosage
• Plaque forming units (pfu)

References