Cell cycle

The cell cycle, or cell-division cycle, is the series of events that take place in a eukaryotic cell leading to its replication. These events can be divided in two broad periods: interphase—during which the cell grows, accumulating nutrients needed for mitosis and duplicating its DNA—and the mitotic (M) phase, during which the cell splits itself into two distinct cells, often called "daughter cells". The cell-division cycle is a vital process by which a single-celled fertilized egg develops into a mature organism, as well as the process by which hair, skin, blood cells, and some internal organs are renewed.

Additional recommended knowledge

Daily Visual Balance Check

Guide to balance cleaning: 8 simple steps

Essential Laboratory Skills Guide

Phases of the cell cycle

The cell cycle consists of four distinct phases: G₁ phase, S phase, G₂ phase (collectively known as interphase) and M phase. M phase is itself composed of two tightly coupled processes: mitosis, in which the cell's chromosomes are divided between the two daughter cells, and cytokinesis, in which the cell's cytoplasm divides forming distinct cells. Activation of each phase is dependent on the proper progression and completion of the previous one. Cells that have temporarily or reversibly stopped dividing are said to have entered a state of quiescence called G₀ phase.

M phase

The relatively brief M phase consists of nuclear division (mitosis) and cytoplasmic division (cytokinesis). In plants and algae, cytokinesis is accompanied by the formation of a new cell wall. The largest of all these processes is (interphase).

Interphase

After M phase, the daughter cells each begin interphase of a new cycle. Although the various stages of interphase are not usually morphologically distinguishable, each phase of the cell cycle has a distinct set of specialized biochemical processes that prepare the cell for initiation of cell division.

G₁ phase

The first phase within interphase, from the end of the previous M phase till the beginning of DNA synthesis is called G₁ (G indicating gap or growth). During this phase the biosynthetic activities of the cell, which had been considerably slowed down during M phase, resume at a high rate. This phase is marked by synthesis of various enzymes that are required in S phase, mainly those needed for DNA replication. Duration of G₁ is highly variable, even among different cells of the same species. ^[1]

S phase

The ensuing S phase starts when DNA synthesis commences; when it is complete, all of the chromosomes have been replicated, i.e., each chromosome has two (sister) chromatids. Thus, during this phase, the amount of DNA in the cell has effectively doubled, though the ploidy of the cell remains the same. Rates of RNA transcription and protein synthesis are very low during this phase. An exception to this is histone production, most of which occurs during the S phase. ^{[2] [3]} The duration of S phase is relatively constant among cells of the same species. ^[4]

G₂ phase

The cell then enters the G₂ phase, which lasts until the cell enters mitosis. Again, significant protein synthesis occurs during this phase, mainly involving the production of microtubules, which are required during the process of mitosis. Inhibition of protein synthesis during G₂ phase prevents the cell from undergoing mitosis.

G₀ phase

The term "post-mitotic" is sometimes used to refer to both quiescent and senescent cells. Nonproliferative cells in multicellular eukaryotes generally enter the quiescent G₀ state from G₁ and may remain quiescent for long periods of time, possibly indefinitely (as is often the case for neurons). This is very common for cells that are fully differentiated. Cellular senescence is a state that occurs in response to DNA damage or degradation that would make a cell's progeny nonviable; it is often a biochemical alternative to the self-destruction of such a damaged cell by apoptosis. Some cell types in mature organisms, such as parenchymal cells of the liver and kidney, enter the G₀ phase semi-permanently and can only be induced to begin dividing again under very specific circumstances; other types, such as epithelial cells, continue to divide throughout an organism's life.

Regulation of cell cycle

  Regulation of the cell cycle involves steps crucial to the cell, including detecting and repairing genetic damage, and provision of various checks to prevent uncontrolled cell division. The molecular events that control the cell cycle are ordered and directional; that is, each process occurs in a sequential fashion and it is impossible to "reverse" the cycle.

Role of Cyclins and CDKs

Two key classes of regulatory molecules, cyclins and cyclin-dependent kinases (CDKs), determine a cell's progress through the cell cycle.^[5] Leland H. Hartwell, R. Timothy Hunt, and Paul M. Nurse won the 2001 Nobel Prize in Physiology or Medicine for their discovery of these central molecules. ^[6] Many of the genes encoding cyclins and CDKs are conserved among all eukaryotes, but in general more complex organisms have more elaborate cell cycle control systems that incorporate more individual components. Many of the relevant genes were first identified by studying yeast, especially Saccharomyces cerevisiae; ^[7] genetic nomenclature in yeast dubs many of these genes cdc (for "cell division cycle") followed by an identifying number, e.g., cdc25.

Cyclins form the regulatory subunits and CDKs the catalytic subunits of an activated heterodimer; cyclins have no catalytic activity and CDKs are inactive in the absence of a partner cyclin. When activated by a bound cyclin, CDKs perform a common biochemical reaction called phosphorylation that activates or inactivates target proteins to orchestrate coordinated entry into the next phase of the cell cycle. Different cyclin-CDK combinations determine the downstream proteins targeted. CDKs are constitutively expressed in cells whereas cyclins are synthesised at specific stages of the cell cycle, in response to various molecular signals. ^[8]

General mechanism of cyclin-CDK interaction

Upon receiving a pro-mitotic extracellular signal, G₁ cyclin-CDK complexes become active to prepare the cell for S phase, promoting the expression of transcription factors that in turn promote the expression of S cyclins and of enzymes required for DNA replication. The G₁ cyclin-CDK complexes also promote the degradation of molecules that function as S phase inhibitors by targeting them for ubiquitination. Once a protein has been ubiquitinated, it is targeted for proteolytic degradation by the proteasome. Active S cyclin-CDK complexes phosphorylate proteins that make up the pre-replication complexes assembled during G₁ phase on DNA replication origins. The phosphorylation serves two purposes: to activate each already-assembled pre-replication complex, and to prevent new complexes from forming. This ensures that every portion of the cell's genome will be replicated once and only once. The reason for prevention of gaps in replication is fairly clear, because daughter cells that are missing all or part of crucial genes will die. However, for reasons related to gene copy number effects, possession of extra copies of certain genes would also prove deleterious to the daughter cells.

Mitotic cyclin-CDK complexes, which are synthesized but inactivated during S and G₂ phases, promote the initiation of mitosis by stimulating downstream proteins involved in chromosome condensation and mitotic spindle assembly. A critical complex activated during this process is a ubiquitin ligase known as the anaphase-promoting complex (APC), which promotes degradation of structural proteins associated with the chromosomal kinetochore. APC also targets the mitotic cyclins for degradation, ensuring that telophase and cytokinesis can proceed.

Specific action of cyclin-CDK complexes

Cyclin D is the first cyclin produced in the cell cycle, in response to extracellular signals (eg. growth factors). Cyclin D binds to existing CDK4, forming the active cyclin D-CDK4 complex. Cyclin D-CDK4 complex in turn phosphorylates the retinoblastoma susceptibility protein (RB). The hyperphosphorylated RB dissociates from the E2F/DP1/RB complex (which was bound to the E2F responsive genes, effectively "blocking" them from transcription), activating E2F. Activation of E2F results in transcription of various genes like cyclin E, cyclin A, DNA polymerase, thymidine kinase, etc. Cyclin E thus produced binds to CDK2, forming the cyclin E-CDK2 complex, which pushes the cell from G₁ to S phase (G₁/S transition). Cyclin A along with CDK2 forms the cyclin A-CDK2 complex, which initiates the G₂/M transition. Cyclin B-CDK1 complex activation causes breakdown of nuclear envelope and initiation of prophase, and subsequently, it's deactivation causes the cell to exit mitosis.^[8]

Cell cycle inhibitors

Two families of genes, the cip/kip family and the INK4a/ARF (Inhibitor of Kinase 4/Alternative Reading Frame) prevent the progression of the cell cycle. Because these genes are instrumental in prevention of tumor formation, they are known as tumor suppressors.

The cip/kip family includes the genes p21, p27 and p57. They halt cell cycle in G₁ phase, by binding to, and inactivating, cyclin-CDK complexes. p21 is activated by p53 (which, in turn, is triggered by DNA damage eg. due to radiation). p27 is activated by Transforming Growth Factor β (TGF β), a growth inhibitor.

The INK4a/ARF family includes p16INK4a, which binds to CDK4 and arrests the cell cycle in G₁ phase, and p14arf which prevents p53 degradation.

Checkpoints

Cell cycle checkpoints are used by the cell to monitor and regulate the progress of the cell cycle.^[9] Checkpoints prevent cell cycle progression at specific points, allowing verification of necessary phase processes and repair of DNA damage. The cell cannot proceed to the next phase until checkpoint requirements have been met.

Several checkpoints are designed to ensure that damaged or incomplete DNA is not passed on to daughter cells. Two main checkpoints exist: the G1/S checkpoint and the G2/M checkpoint. G1/S transition is a rate-limiting step in the cell cycle and is also known as restriction point.^[8] An alternative model of the cell cycle response to DNA damage has also been proposed, known as the postreplication checkpoint.

p53 plays an important role in triggering the control mechanisms at both G1/S and G2/M checkpoints.

Role of cell cycle in tumor formation

A disregulation of the cell cycle components may lead to tumor formation. As mentioned above, some genes like the cell cycle inhibitors, RB, p53 etc., when they mutate, may cause the cell to multiply uncontrollably, forming a tumor. Although the duration of cell cycle in tumor cells is equal to or longer than that of normal cell cycle, the proportion of cells that are in active cell division (versus quiescent cells in G0 phase) in tumor cells are much more compared to that in normal cells. Thus there is a net increase in cell number as the number of cells that die by apoptosis or senescence remains the same.

The cells which are actively undergoing cell cycle are targeted in cancer therapy as the DNA is relatively exposed during cell division and hence susceptible to damage by drugs or radiation. This fact is made use of in cancer treatment; by a process known as debulking, a significant mass of the tumor is removed which pushes a significant number of the remaining tumor cells from G0 to G1 phase (due to increased availability of nutrients, oxygen, growth factors etc.). Radiation or chemotherapy following the debulking procedure kills these cells which have newly entered the cell cycle. ^[8]

Synchronization of cell cultures

Several methods can be used to synchronise cell cultures by halting the cell cycle at a particular phase. For example, Serum starvation ^[10] and treatment with Thymidine or Aphidicolin ^[11] halt the cell in the G1 phase, Mitotic shake-off, treatment with colchicine ^[12] and treatment with Nocodazole ^[13] halt the cell in M phase and treatment with 5-fluorodeoxyuridine halts the cell in S phase.

Observation

There are numerous ways to observe the cell cycle occurring. Onion bulbs or garlic root tips are often used.

A sample of root tip is fixed in a mixture of 99% of 70% aqueous industrial methylated spirit and 1% glacial ethanoic acid for two hours. Treat the root tips in 1 molar hydrochloric acid at 60°C for 6–7 minutes. Rinse thoroughly with water. Add Schiff's reagent and leave for one hour. Rinse again in distilled water. Observe under a microscope.

References

1. Morgan DO. (2007) The Cell Cycle: Principles of Control. New Science Press: London.
2. Alberts B, Johnson A, Lewis J, Raff M, Roberts K, Walter P. (2003). Molecular Biology of the Cell. Ch 17. Garland Science: New York. 4th ed.
3. Lodish H, Berk A, Matsudaira P, Kaiser CA, Krieger M, Scott MP, Zipursky SL, Darnell J. (2004). Molecular Cell Biology. WH Freeman: New York, NY. 5th ed.
4. Watson JD, Baker TA, Bell SP, Gann A, Levine M, Losick R. (2004). Molecular Biology of the Gene, Ch. 7. Peason Benjamin Cummings; CSHL Press. 5th ed.